Pipe/3D Profiler Series


Dualforma Series

This model is featured by servo-driven 4-axial controlled motion including orthogonal 2-axes (vertical and horizontal) for the top-table sized by 1000 x 2000mm (for the type 2000), and two-turning axes for two sets of 3D profiling cameras. Three variations of the Dualformer are available likewise in the Cloudform, or the type GE for profiling general shapes, the type PT exclusively for pipe profiling, and the type GP for the performances of the two combined. These types execute profiling in two modes, or one for profiling the center line of a specimen and the other for profiling the external form of a pipe and fittings. These profiled data is converted to the data in 3D format with the accuracy of +/- 0.1 mm order that works as severe tolerance check for quality judgment as being observed in inspection by the mechanical gauges. By simply placing a specimen on the profiler, laser projection starts for profiling general shape and subsequent profiling external 3D design of a specimen by the power of travelling 3D camera. The software for these models is made of two-versions consolidated, or one for profiling general shapes as is applied in Opton 3D profiler Surftizer and pipe profiler software as is applied in Cloudforma. The pipe profiler software also includes automatic feedback compensation of the profiled data on the produced form of a tested pipe.

Cludforma Series

Performance for prototype bending of a medium- or smaller-sized work piece. The machine executes profiling by the camera that is manually travelled to the best positioning to the work piece.

【PT-1】
By interfacing the profiler to the pipe bender, one-time profiling will find dimensional error on a bent specimen, which is further followed by automatic creation of compensation data for immediate quality production to start. Attached parts and branched pipe can also be profiled.

【GP-1】 
Same function is implemented in the machine of this type as the type PT-1 with additional function of 3D profiling on a press-molding of 50cm or less each size and compensational verification of the profiled data to those of CAD.