G-WIN Robotic Bender for 1D
●This is stronger pitching version of the type G-WIN with mandrel.
●Optional cut-off is also available. Long-sized work piece can be automatically cut-off immediately upon bending. Ideal for sharp-angular bending of large-dia work piece with cost saving of labor and material.
●Lower cost investment in comparison with conventional type of benders.
Type | G-WIN 35 | G-WIN 40 | G-WIN 50 | G-WIN 60 | G-WIN 70 | |
---|---|---|---|---|---|---|
Max dia of work piece | SUS/No Mandrel | φ34×t1.5 | φ42.7×t2.0 | φ50.8×t2.0 | φ63.5×t2.2 | φ65×t2.0 |
STKM/No mandrel | φ38.1×t2.3 | φ50.8×t2.3 | φ54.0×t2.6 | φ63.5×t4.2 | φ76.3×t2.8 | |
AL・CU/No mandrel | φ38.1×t3.0 | φ50×t4.0 | φ55.0×t4.0 | φ65.0×t7.0 | φ76.3×t6.0 | |
Standard effective length (variable by every 500mm) | mm | 2500 | 2500 | 2500 | 2500 | 2500 |
Max bending R | mm | 150 | 200 | 200 | 200 | 200 |
Type | G-WIN 80 | G-WIN 90 | G-WIN 100 | G-WIN 130 | G-WIN 150 | |
---|---|---|---|---|---|---|
Max dia of work piece | SUS/No Mandrel | φ76.3×t2.8 | φ89.1×t2.0 | φ114.3×t2.1 | φ127×t3.5 | φ139.8×t4.0 |
STKM/No Mandrel | φ89.1×t3.2 | φ101.6×t3.2 | φ114.3×t4.5 | φ139.8×t4.5 | φ165.2×t5.0 | |
AL・CU/No Mandrel | φ90×t5.0 | φ100×t5.0 | φ110×t8.0 | φ140×t7.0 | φ150×t8.0 | |
Standard effective length (variable by every 500mm) | mm | 2500 | 3000 | 3000 | 4000 | 4000 |
Max bending R | mm | 200 | 300 | 300 | 400 | 650 |